ADAMAX PRO SCR FLUID ADDITIVE
ADMAX® PRO is the improved edition of ADMAX®, designed to solve AdBlue® system problems. This powerful solution offers exceptional detergent and solvent properties, effectively eliminating crystallisation and contamination within the tank, pump and injector of the SCR (AdBlue®) system.
By ensuring a clean and optimised system, ADMAX® PRO enhances both performance and reliability while significantly reducing harmful emissions in the process. This additive offers complete compatibility with AdBlue® and does not cause any harm or corrosion. ADMAX® PRO does not leave any combustion residue in the DPF or SCR catalyst.
Benefits
- Eliminates crystal formation in SCR
- Reduces nitrogen oxide (NOx) emissions
- Preserves the SCR
- Eliminates SCR clogging
- Helps to maintain optimal fuel efficiency
Properties
- Accelerates the conversion of urea into ammonia
- Prevents crystallisation at temperatures below -10°C
- Enhances the efficiency of the SCR system
- Extends the lifespan of the SCR system
- Protects the exhaust system from corrosion
- Description
Application
Compatible with all AdBlue®-equipped diesel vehicles. ADMAX® PRO should be used exclusively in the AdBlue® reservoir. If the SCR system is experiencing a malfunction, it may be necessary to drive approximately 1000 km after adding ADMAX® PRO.
It is recommended to use ADMAX® PRO preventively (every 30,000 km) after the initial treatment to keep the Adblue system clean and prevent issues. The standard ADMAX® can also be used at each Adblue® refill.
Directions for use
One dose of 250 ml is sufficient for up to 20 liters of Adblue®. ADMAX® PRO can be directly mixed with Adblue®, preferably but not exclusively before filling the tank.
Available in
250 ML - REF. 7060250
You May Like
The extended, metal DPF Probe is designed to spray the DPF Gun Fluid directly into the hot DPF via a sensor on the unit. 4 holes in the end of the brass probe section, distribute the fluid deep into the DPF itself, unaffected by the heat. An addition to the DPF gun kit. The kit hose is used through the front air pressure tube, and this metal probe inside the DPF.
New
The Launch DPF cleaning gun is designed to help with the cleaning of Diesel Particulate Filters (DPF), a common problem with modern diesel vehicles. This is due to strict regulations designed to reduce harmful emmissions, making DPFs a must-have.
With the DPF cleaning gun, you can spray a cleaning fluid straight onto the DPF via the pressure sensor or vacuum hole. The gun is simply filled with Launch Dpf cleaning fluid and connected to a compressed air line, enabling you to spray at pressure into the DPF.
Once applied, the fluid will start dissolving soot inside the filter. You can apply the fluid without removal or other unnecessary work. Heavily contaminated cases may require a forced DPF regeneration.
This product benefits from a 12 month warranty
Perfect for after the DPF has been cleaned, Dpf cleaning fluid
New
Launch UK DPF cleaning fluid is a highly efficient product for use with the Launch UK DPF gun. It will dissolve soot build-up in the DPF filter, even from DPFs that will no longer respond to a forced regeneration. The process will reduce soot levels, allowing the DPF software to force a regeneration and recover the DPF filter. Each one-litre bottle should be sufficient for two cars, heavy contamination may require a second treatment. The whole process can be undertaken with the DPF remaining in-situ and should take around 20-30 minutes
Price is for 1 Litre bottle.
Minium order quantity 3 Litres Shipping paid on minium quantity 1 carton ( 12 litres ).